Description

Running at a higher voltage of 400V, the Gavita Pro 1000e DE Complete Fixture 400V will produce approximately 10-20% more light and less heat, than a standard 240V 1000W Growlight.

Running at very high frequency (<100 KHz), it helps produce a superior light spectrum, with a lower lumen drop over time.

It comes with the replaceable Miro Aluminium HR96 reflector and the Gavita Enhanced Spectrum 1000W 400V lamp; the reflector features 96% reflectivity and ideally needs replacing once a year along with the lamp. For best results, Gavita recommend you change both the reflector and lamp once a year. You can also swap the HR96 reflector for the M110 (Small room reflector) or the W150 (Wide reflector).

The Double Ended Lamp supplied is one of the best available on the market to date – in Gavita DE fixtures, the lamp is always in the centre of the reflector, allowing greater reflectivity without being obstructed by a support wire (commonly found in Single Ended Lamps).

The ballasts are completely sealed and feature a specially designed GORE-TEX® plug; this vents excess heat and humidity back into the room, preventing internal circuit faults. During operation, the ballast will be cool to touch, unlike those older magnetic style ballasts.

Due to the ballast location and no external power cable, the whole unit is FCC regulation compliant (No EMI produced)

It features a dimmer (adjusting) switch to allow the user to choose different wattage outputs (600W – 1150W) for greater control over their growing environment.
For superior control, we suggest you use the Gavita Master Controller, which reduces the output power (wattage), based on temperature (See Related Items).

Please note, without the use of the W150 Reflector, the Gavita Pro 1000e 400V unit is most suited for use in areas with more than 2.15m in height.
For areas with a lower ceiling, we recommend using the Gavita 6/750e DE Flex Complete Fixture.

Includes

1x Gavita Pro E-Series 1000e (complete fixture with lamp, ballast and reflector),
2x RJ14 to RJ14 cables,
1x RJ14 splitter (2-1),
1x 5m power cable

Specification

Product weight: 6.35 kg
Dimensions: (L*W*H) 56.6x24x34 cm (height excl. mounting hooks)
Temperature case: 75 °Celsius
Temperature ambient: 0 ~ 35 °Celsius
Input voltage: +/-10% 240 V AC
Input current at 100%: 4.6 A
Input current at 110/115%: 5.3 A
Input power at 100%: 1055 W
Input power at 110/115%: 1210 W
Power factor: 0.95 – 0.98
Total Harmonic Distortion: < 10%
Frequency: 50 – 60 Hz
Certification: CE
Insulation: Class 1 – requires an earth connection
Power inlet: IEC C14
Power output settings (plus EXT): 600/750/825/1000/1150 Watt /EXT
External dim: Gavita Master controller analog protocol (<11,5V)
External control signal: RJ14 connector build in (6P4C)
Ignition voltage: 5 kV / 600 ms
Inrush current: 37,5 Amps