Description

The newly designed Jupiter2 light mover gives trouble free operation under the most extreme conditions. The Jupiter2 now incorporates a machine built variable time delay circuit board which is adjustable from 0.5 – 55 seconds. This allows for even plant growth across the whole garden. The motor traction speed has been set at the optimum level for excellent growth which is approximately 140 seconds per meter.
The motor and gearbox in the Jupiter2 have been recently been upgraded to an even heavier duty model that is now fully sealed from the environment within a galvanized rust proof chassis. The zinc plated drive wheel runs on a 1/2ins steel axle that is supported by an oil impregnated Shorelube Brush which is the largest on the market today. The 0-60 second variable time delay PCB now incorporates an optical switching devise which has been chosen specifically for its reliability.

Kit 1: For 1 light includes:
1 x Variable time delay motor
1 x 2000mm track.
Full instructions.

Kit 2: For 3 lights includes:
1 x Variable time delay motor
1 x 2000mm track
1 x 2000mm crossbar
2 x Hooks
1 x Long eye bolt
Full instructions

Kit 3: For 2 lights includes:
1 x Variable time delay motor unit
2 x 2000mm track
1 x Aluminium push rod.
1 x Jockey wheel.
1 x Long eye bolt, 2 x nuts, 2 x washers
1 x Small eye bolt
Full instructions

Kit 4: For 6 lights includes:
1 x Variable time delay motor unit
2 x 2000mm track
1 x Aluminium push rods.
1 x Jockey wheel
4 x Hooks
2 x Long Eye Bolts
Full instructions

Note: What ever Jupiter2 kit you own it is possible to either increase or decrease the size of it by simply adding or removing the pushrods and crossbars as needed. You do not need to change or add motors.