AutoPot 12 Pot Kit 16mm

AutoPot 12 Pot Kit 16mm

The AutoPot 12 Pot Kit 16mm gives you all the items you need to feed twelve plants in 15lr pots from a 250ltr tank.

Floor space required for this kit approx: 120 x 240cm

Overview.

The AutoPot Pot Kit is the ultimate in low maintenance growing systems. Each system is fitted with a specially designed AQUAvalve that controls the flow of water/nutrient to your plants by simple gravity pressure from a tank or waterbutt. No pumps, no electricity, no mains water pressure and no timers are required. The AutoPot is a totally plant driven system that releases the right amount water to keep your plants happy day in day out. As there is no recirculating nutrient as with hydroponics systems, the AutoPot system requires no daily nutrient management meaning it can be left alone for long periods of time. All you need to do is remember to keep the tank topped up and the plants take care of the rest.

Kit Contents.

AutoPot 1Pot System x 12
Waterbutt 250ltr x 1
Waterbutt Stand 250ltr x 1
Clickfit Tank Adapter & Filter to 16mm o.d Pipe x 1
Flow Control Tap Barbed 16mm (1/2ins) x 1
Green Hose 16mm o.d (1/2ins) Per 1m x 10
Cross Connector 16mm o.d (13mm i.d) to 6mm o.d (4mm i.d) x 6

Advice.

Always raise your tank to a minimum of 150mm above the highest AQUAvalve and refill the tank when it is approximately 1/3rd empty. Use good quality soil or coco with a 30-50% mix of perlite. Always keep the AQUAvalve compartments clean and free from debris. Replace root control and matrix discs after each harvest.